MODEM SETUP > BILLION 7402X

Setting up a Billion 7402R2 or 7402g to connect to Comcen ADSL

Connect the Billion BPIAC 7402R2 or 7402G to the power, phone line and network to your PC.
Turn it on and wait about 1 minute for it to boot up and establish an ADSL signal.

Load Internet Explorer.

Type the following in the address bar: 192.168.1.254

When prompted for a username and password, type:

Username: admin

Password: admin

Click on Quick Start on the left-hand side.

Once the new pages loads, in the username and password fields, type:

Username: [phonenumber]@spin.net.au

Password: [the password you selected when signing up with us]

NOTE: For Users in ACT, WA, NT, SA & TAS, your username must be:

[phonenumber]@dsl.spin.net.au

Once you have completed the username and password fields, click Apply at the bottom of the page.

A window will appear saying 'Successful', click OK.

Click the blue Save Config button at the bottom of the page.
Once the new page loads, click the Apply button.

A window will appear saying 'Save Config to Flash Successful', click OK.

You are now connected to the internet.

NOTE: If you have any problems understanding these instructions or you need help connecting to the internet, call Comcen technical support, on: 1300 300 324

You will be asked for your phone number and which lights are on, off or flashing on your modem.
Please have this information ready.